Polaris Vac-Sweep 360 User Manual download pdf (Page 10)

www.polarispool.com

If the P

olaris cleaner displays the following

actions

, adjustments may be necessary to

restore perf

ormance. Refer to the exploded

par

ts diagram for part references.

Action: Hangs up on steps or other

obstacles longer than 3-1/2

minutes.

Solution: 1. Check the wheel RPM.

2. Verify the back-up valve

is cycling.

3. Adjust the thrust jet.

4. Remove unnecessary pool

hardware or install a Ladder

Guard Kit (order part #G21

from a Polaris dealer).

Action: Polaris is sluggish, running

with less power than normal.

Solution: 1. Check the filter screen in the

quick disconnect and clean,

if necessary.

2. Clean the skimmer basket,

pump basket, and pool filter.

3. Check all of the hoses,

connections, and swivels for

leaks that could cause loss of

water pressure.

4. Check the wheel RPM.

Action: Polaris flies around the pool.

Solution: 1. Check the wheel RPM. If

more than 32 RPM, unscrew

the pressure relief v

alv

e

to decrease w

ater flo

w

to cleaner.

2. Verify the back-up valve is

cycling. Hold the valve out of

the water and watch the jet. It

should come on and go off.

3. Adjust 3-way diverter to

reduce the amount of

w

ater flo

w to the P

olar

is

pool cleaner.

Action:

Polaris does not back up.

Solution: 1. Verify the back-up valve

is cycling.

2. Check the wheel RPM.

3. If the bag is full, empty it.

4. If the head float has water

in it, replace it.

5. Ensure feed hose is floating.

Action: Polaris only turns in one

direction.

Solution: 1. Adjust the thrust jet.

2. If the end of the hose that

connects to the Polaris has a

curve to it, align it with the

curve of the feed pipe.

3. Make sure that the swivel

on the feed pipe turns freely.

4. Ensure feed hose is floating

Action: Feed hose becomes tangled.

Solution: 1. Remeasure the hose to

verify that it is adjusted to

the proper length for the

pool shape.

2. With the Polaris operating,

check that the swivels

in the hose and the hose

connections tur

n freely

.

3.

Ensure the f

eed hose

is floating.

4. With the Polaris turned off,

spin each of the wheels. All

of the wheels should

turn together.

Action:

Sweep hose is suc

ked into the

vacuum tube.

Solution: 1. Make sure the opening at the

end of the sweep hose is not

blocked by the sweep hose

scrubber.

2. Adjust the sweep hose to a

gentle s

weeping motion.

Troubleshooting

English

1 2 ... 5 6 7 8 9 10 11

Comments to this Manuals

No comments