Polaris Sportsman Touring 500 HO User Manual download pdf (Page 110)

106

MAINTENANCE

PVT System

When To Use Low Range and High Range

PVT Drying

There may be some instances when water is accidently ingested into the

PVT system. Use the following instructions to dry it out before operat-

ing.

1. Position the vehicle on a level surface.

2. Remove the drain plug. Allow the water to drain completely. Rein-

stall the drain plug.

3. Start the engine. Place the transmission in PARK.

4. Apply varying throttle for 10-15 seconds to expel the moisture and

air-dry the belt and clutches. Do not hold the throttle wide open for

more than 10 seconds.

5. Allow the engine RPM to settle to idle speed, then shift the trans-

mission to the lowest available range.

6. Test for belt slippage. If the belt slips, repeat the process.

7. Take the vehicle to your dealer for service as soon as possible.

Condition Range to Use

Operating at speeds less than 7 MPH (11 km/h) Low

Towing heavy loads Low

Operating in rough terrain (swamps, mountains, etc.) Low

Operating at speeds greater than 7 MPH (11 km/h) High

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 144 145

No comments

Polaris Sportsman Touring 500 HO User Manual Page 110