Polaris Trail Touring User Manual download pdf (Page 100)

MAINTENANCE

Track

Track Tension

If the track needs adjustment:

6. Loosen the rear idler

shaft bolts.

7. Loosen the locknuts.

8. Tighten or loosen the

track adjusting

screws to provide

equal adjustment on

both sides of the

track.

9. Repeat the measure-

ment on the other

side of the track.

Tip: Check more frequently

when the machine is

new.

10. Start the machine and

slowly rotate the track at least five revolutions. Let the track come

to a stop (do not apply brakes).

11. Check track alignment (see page 98) and adjust as necessary.

12. Tighten the locknuts.

13. Tighten the idler shaft bolts.

14. (

n) Torque idler shaft bolts to 35 ft. lbs. (47.5 Nm).

Slack

Measurement

Adjusting

Screw

Locknut

Shaft Bolt

Track

10 lbs. (4.54 kg)

(40 cm)

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 136 137

No comments

Polaris Trail Touring User Manual Page 100