Polaris Outlaw 450 MXR User Manual download pdf (Page 115)

111

Maintenance

Engine Cooling System

Cooling System Bleeding

Bleeding the cooling system is required only if the system has been drained for maintenance

and/or repair. Always allow the engine to cool sufficiently before removing the radiator pres-

sure cap.

1. Remove the pressure cap.

2. Using a funnel, slowly add the recommended coolant. Fill the radiator to the bottom of

the filler neck.

3. Reinstall the pressure cap.

4. Start the engine and allow it to idle for five minutes, or until operating temperature is

reached.

5. Stop the engine.

6. After the engine has cooled, add additional coolant to refill the radiator to the bottom of

the filler neck.

7. Operate the vehicle for 20 minutes, allow the engine to cool, then recheck the coolant

level in the radiator. Add coolant as needed.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 211 212

No comments

Polaris Outlaw 450 MXR User Manual Page 115