Polaris Predator User Manual download pdf (Page 123)

120

MAINTENANCE AND LUBRICATION

Lights

Headlight Assembly Replacement

5. Install the new headlamp by inserting the outboard pivot pin in the hole of the

mounting tab on the cab.

6. Install the adjuster bracket onto the inboard pivot pin of the headlamp.

7. Adjust for approximately 1/16” clearance between the bracket and the edge of the

headlight. Tighten the mounting screws. IMPORTANT: Be sure the bracket is 90

degrees to the pivot pin so the lamp can move freely.

8. Install the adjusting screw, leaving it loose so the headlight can be adjusted.

9. Reinstall the front cab and connect the wire harness to the headlamp.

10. Adjust the lamps as needed, then tighten the adjuster screw. See page 122.

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 188 189

No comments

Polaris Predator User Manual Page 123