Polaris 600 HO RMK 155 User Manual download pdf (Page 101)

MAINTENANCE

Clutch System

Drive Belt Removal

1. Stop the engine after operating in a forward motion.

NOTE: For easier accessibility, make sure the clutch tool access hole is visible

between the 11:00 and 2:00 positions of the clutch sheave.

2. Turn the ignition key off.

Wait for the engine to come

to a complete stop.

3. Lock the parking brake.

4. Open the hood.

5. Remove the left side panel.

6. Locate the L-wrench in the

tool kit. Install the wrench

into the open threaded access

hole in the outer sheave of

the clutch.

7. Turn the wrench clockwise

until the sheaves open far

enough to remove the belt.

CAUTION

Do not attempt to remove the drive belt after operating in reverse. The snow-

mobile must be stopped after forward motion to prevent damage to compo-

nents during belt removal.

11:00

2:00

Access Hole

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 134 135

No comments

Polaris 600 HO RMK 155 User Manual Page 101