Polaris 600 HO RMK 155 User Manual download pdf (Page 55)

PRE-RIDE INSPECTIONS

Check Before Starting the Engine

n Parking Brake Lever Lock

Use the parking brake lever lock

only when you want the snowmobile

to remain stationary; for example,

when parked on an incline for a

period of five minutes or less.

1. Brake Lever

2. Parking Brake Lever Lock

3. Master Cylinder Reservoir/

Cover

4. Fluid Level Indicator

Lock Engagement

To engage the lock, squeeze the brake lever tightly and push forward on

the lock. Hold the lock forward while releasing the brake lever.

NOTE: If the brake lever is squeezed tightly enough, the lock will move freely

into place. Do not force the lock or it may break.

The parking brake light on the gauge will light up if the parking brake

lever lock is set while the engine is running. It will also be lit when the

service brake is in use. If the parking brake light does not come on when

the parking brake or service brake is in use, have it serviced by your

dealer.

Lock Release

To release the lock, squeeze the brake lever tightly. The lock will return

to the unlock position.

WARNING

If the parking brake lever lock is partially or entirely engaged while riding, the

brakes may overheat, resulting in brake damage. In extreme cases it could

cause a fire, which could result in serious injury or death. Always ensure that

the lever lock is completely disengaged before operating the snowmobile.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 134 135

No comments

Polaris 600 HO RMK 155 User Manual Page 55