Polaris 600 HO RMK 155 User Manual download pdf (Page 106)

103

MAINTENANCE

Track Tension

If the track needs adjustment:

5. Loosen the rear idler shaft bolt.

6. Loosen the lock nuts.

7. Tighten or loosen the track adjusting screws as necessary to provide

equal adjustment on both sides of the track.

8. Repeat the measurement on the other side of the track.

NOTE: Check more frequently when the snowmobile is new.

9. Start the engine and slowly rotate the track at least five revolutions.

Let the track come to a stop (do not apply brakes).

10. Check track alignment (see page 104) and adjust as necessary.

11. Tighten the lock nuts.

12. Tighten the idler shaft bolts. Torque to 35 ft. lbs. (47.5 Nm).

Idler Shaft Bolt

Adjusting

Screw

Lock

Nut

10 lbs.

(4.54 kg)

16" (40 cm)

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 134 135

No comments

Polaris 600 HO RMK 155 User Manual Page 106